ด้านการอนุรักษ์พลังงาน

อุปกรณ์ไฟฟ้าโรงงาน

เกียร์มอเตอร์และไดร์มอเตอร์

ปั๊มลมและปั๊มน้ำ

เครื่องมือวัดและควบคุมอุตสาหกรรมแบบพกพา

บริการดูแลอาคารสูง

TO MEASURE WIDE RANGE OF REVOLUTIONS AND SURFACE SPEEDS WITH FLOATING DECIMAL POINTS

The battery operated handheld computer- circuitry-controlled, contact type tachometers ofter the following distinct advantages:

• The hand-fitted circular design has its most compact dimensions
• CPU circultry gives high reliability and LCD assures low battery consumption.
• Memory capacity

• Multi-Mode Speed Selection
  DT-105/107 are programmed to compute 16 different
  mode : rpm M/min., Y/min., etc, and convert rpm.
  surface speeds into the desired mode.
• Largest Memory Capacity
  The last reading, maximum, minimum, and 4 intermediate readings can automatically be stored and be provided by selection.
• Minimum shaft loading-overspeed protection.
  A single range low inertia drive system eliminates overspeed damage on low speed settings.
• Heavy duty aluminum die-casting body.
  
   

• Multi-Mode Speed Selection
  DT-105/107 are programmed to compute 16 different
  mode : rpm M/min., Y/min., etc, and convert rpm.
  surface speeds into the desired mode.
• Largest Memory Capacity
  The last reading, maximum, minimum, and 4 intermediate readings can automatically be stored and be provided by selection.
• Minimum shaft loading-overspeed protection.
  A single range low inertia drive system eliminates overspeed damage on low speed settings.
• Heavy duty aluminum die-casting body.
   

• Wide speed range
  From the lowest 6 rpm to 30,000 rpm can be displayed.
• Memory capacity
• Measuring distance is as long as 300 mm.
   

• Measurement of speeds as low as 6rpm!!!
  The only non-contact tachometer with this capability!!
• C-Mos single chip micro computer high reliability and low maintenance
• Largest memory capacity
• Oversized 5 digit LCD
• Rugged construction
• Contact measurements with adapter
   

•  Wide measuring range from 6 rpm up to 30,000 rpm can be measured.
• C-Mos single chip micro computer high reliability and low maintenance
• Largest memory capacity
• Oversized 5 digit LED
• Rugged construction
• Contact measurements with adapter
   

DIGITAL PANEL TYPE TACHOMETERS

NEW VERSATILE MODEL DT-5TG
DISPLAYS ROTATIONAL, LINEAR, SURFACE SPEED, & FLOW RATE, ELAPSE TIME

 

Model DT-5TG

• Optional functions can be added by interfacing cassetle 1 & 2.
  
  Hooking the optional cassete-1 & 2 onto DT-5TG enables DT-5TGemit various output signals : BCD, RS-232C, Analog current, and the DT-5TG can be used as ratiometer and rotation and speedmeter of analog input.
   

• All settings can be done by operation switches on front panel

• Any AC volttage from 85 to 264 can power this unit.

• A large selection of sensors are available to meet your application requirements; Rotary pulse generator, open collector, relay control, etc.
  
   

•  An accuracy of +- 0.008%, +- 1 digit.
• Optional decimal point.
• All functions are easily set via front panel keys.
•  Easy monuting, no brackets or screws are required.
• Any AC voltage between 85 and 264 V will power to DT-5TP.

DIGITAL STOROBOSCOPE TACHOMETERS
New Compact Powerful model
Non-Contact Type
DT-311 (Basic) DT-313
DT-314 DT-315

• COMPACT & LIGHT design realizes the smaller than 1/3 of conventional models in sizes.
• 8 TIME BRIGHTER LUMENT AT LOW SPEED is assured. (Comparison with others of SHIMPO)
• WIDE MEASURING RANGE;
  From 60.0 up to 30,000 rpm can be measured.
• CONNECTOR FOR OUTPUT MODULE, provided with standard model. Tune and delayed timing flashing possible.
• FLASH FREQUENCY IS STABLE
  Digital control realized "No drift"
• PHASE ADJUSTMENT FUNCTION
  is built in. The freezed figure can be shifted in tune condition.

• Battery chargeable Full battery covers the -one-hour operation of the measuring and observation of stop motion at any place.
• For movable or portable use, Built-in battery, AC Adapter, or External Power.

• 10 kcps speed response
  Canrespond to change-over to measuring speed of 20 cps and 10 kcps in a wide speed range.
• Easy mounting
  No brackets, no screws, nor any hardware are required.
• Pre-scale value can be automatically convertible
  Onfront panel, the measured value can be converted into optional unit without any calculation.
• Effective figure up to 9th power can be converted with an accuracy.
• Easy operation
  After setting, minor functions can be set by th dip swiches on the rear side. This makes operations on front panel much easier.
• Power failure memory
  For 10 years, 100,000 times, without batteries, this is protected against power failure.

Model TNK- -4

•  Suitable for minute torque or high torque measuring
•  The measured torque can be printed out.
  
   

Model TNK - -5

• Applicable in P.P.cap measurement
• 1st, 2nd & 3rd torque of P.P.cap is automatically printed out.