ยินดีต้อนรับสู่ ห้างหุ้นส่วนจำกัด เอ็ม.อี.พี. คอนโทรล


M1S Series	M1G Series	M1D Series

M1X Series

M1X Series

Specification

*1. Please select the proper motor which does not exceed the rating of the inverter.

*2. Rated capacity is a value of 460V of the rated output voltage.

*3. The output voltage of the inverter will not exceed the power source voltage.

Part Number	M1X084BSA	M1X154BSA	M1X224BSA	M1X374BSA
Applicable motor (kW)-1	0.75	1.5	2.2	3.7
Output capacity (kVA)-2	2.0	3.0	4.4	7.2
Output current (A)	2.5	3.7	5.5	9.0
Output voltage -3	3-phase power source : 3-phase AC 380 to 460 V
Input Voltage	3-phase power source : 3-phase AC 380 to 460 V
Frequency	50/60Hz
Voltage fluctuation allowance	-15%, + 10%
Frequency fluctuation allowance	±0.5%
Control method	Low noise sine wave PWM
Output frequency	0.5 to 400 Hz (Start from 0.05 Hz)
Frequency accuracy	±0.5% (25^◦C ± 10^◦C
Frequency setting resolution	Digital : 0.01 Hz Analog : Setting frequency range/1000 Hz (minimum 0.05 Hz)
Frequency setting signal	DC 0 to + 5V, 0 to + 10V, 4 to 20 mA
Voltage/Frequency characteristics	Base frequency : 30 to 400Hz (1 Hz step) with reduced torque pattern
Rated overload current	150%/min
Regenerative brake torque	150% and avove	100% and above		70% and above
DC brake	Brake start frequency/break operating time/break volume
Acceleration/deceleration time	0 to 3600 s(seconds) (0 to 3s: 0.01s step, 3 to 10s step, 10s or more : 1s step) *Adjustable for 4 kinds of acceleration/deceleration speeds up to 50Hz
Jogging frequency	0 to 30 Hz
Operation mode	2-speed, 4-speed, 8-speed, 16-speed
Others	Auto boost, vector drive control, AVR function/retry function RS-485 communication (factory-set option), parameter lock
Protective functions	Under voltage protection, Over-current protection, Over-voltage protection, Instantaneous power failure protection, Stall prevention, Over-load limitation (current limiter), Overload trip (eletric thermal relay), Restart preventation when power is restored, Self-diagnosid trip (the last 5 causes of trips are saved)
Temperature	-10^◦C~+50^◦C (Non-freezing) Remove the ventilation cover and rubber duct when temperature exceeds 40^◦C
Relative humidity	Relative humidity below 90% (Non-condensing)
Atmosphere	Indoors (to be free from corrosive gas and dust)
Altitude	Below 1000m
Vibration	Below 5.9M/s² (0.6G) (10~60Hz)
Enclosures	Enclosed type (IP40) (with ventilation)
Cooling Method	Self-cooling		Fan-cooling
Mass (kg)	2.9